Send SMS
Contact Us

Multizone PID Ramp And Soak Programmable

Six Zone PWHT/SR Temperature Control Panel

Six Zone PWHT/SR Temperature Control Panel
  • Six Zone PWHT/SR Temperature Control Panel
  • Six Zone PWHT/SR Temperature Control Panel
  • Six Zone PWHT/SR Temperature Control Panel

Approx. Rs 95,000 / Number


Libratherm offers ready to use customized control panel for PWHT/SR cycle - duly wired with A) per zone zero cross over single phase thyristor rated for max. 80A load @ 40 to 240VAC B) Thermocouple plug sockets for controller as well as for external recorder C) Aux. supply mains cord D) Indicating lamps E) heavy duty plug socket for external heater contactor.

Features:
Applications:

Additional Information:

Six Zone Temperature Programmer PRC-6000 for PWHT / SR

Six Zone Temperature Programmer PRC-6000 for PWHT / SR
  • Six Zone Temperature Programmer PRC-6000 for PWHT / SR
  • Six Zone Temperature Programmer PRC-6000 for PWHT / SR
  • Six Zone Temperature Programmer PRC-6000 for PWHT / SR

Approx. Rs 50,000 / Number


Model Wise Description:
ModelDescriptionSize w x h x d (mm.)
PRC-6000Six input/output and Six independent 4 steps profile programmer cum temperature controller96 x 96 x 160

Description:

Libratherm manufactures Six zone Microcontroller based multiple Ramp / Soak programmable PID / On-Off temperature controller cum profile programmer Model PRC-6000 which is designed to improve reliability, accuracy and control of six independent heating zones. It features Ramp and Soak functions (the capability to control the temperature and its rate of change over a predetermined time span). Single and common pattern of 4 ramp/soak steps – (Fixed pattern of 1st pre-heating ramp, 2nd heating ramp, 3rd soaking and 4th cooling ramp) for all six zones or each of the six zone can be independently programmed and stored in the memory. PRC-6000 can also be used as single set point control when the ramp/soak profile control is not desired. PRC-6000 accepts six K type thermocouples and provides outputs in the form of 6 relay contacts in PID or ON/OFF control mode. An extra relay contact is provided to indicate the thermocouple fault condition.

PRC-6000 offers blue colour graphical LCD screen to display temperature of all six zones simultaneously on a single screen. The programmed and running ramp/soak profile can be easily monitored. The front panel keyboard allows programing of ramp/soak profile, PID values, deviation hold values and viewing of various status parameters for all six zones under control. Through keyboard, user can operate each heating zone either in Auto mode or Manual mode.

To monitor the online temperature profile of the heating system, RS 485 serial communication interface can be optionally provided, the same can be connected to the computer. Libratherm provides the window based software to program the controller and to view the online behavior of the heating cycle in both graphical and tabular format. Extra RS485 port can be provided for Master/Slave programming with single master and maximum 10 slaves.

Features:
(common for all 6 zones or independent per zone)

Applications:

Additional Information:

Microprocessor Based Multi-zone Ramp Controller

Microprocessor Based Multi-zone Ramp Controller
  • Microprocessor Based Multi-zone Ramp Controller
  • Microprocessor Based Multi-zone Ramp Controller
  • Microprocessor Based Multi-zone Ramp Controller

Approx. Rs 75,000 / Unit


Model Wise Description:
ModelDescription
PRC-8000-44 input and 4 zone  Ramp / Soak Programmable Profile PID Temperature Controller 
PRC-8000-66 input and 6 zone  Ramp / Soak Programmable Profile PID Temperature Controller 
PRC-8000-88 input and 8 zone  Ramp / Soak Programmable Profile PID Temperature Controller 

Description:
Libratherm offers Microprocessor based Eight Zone PID Temperature indicator / Controller (Model PRC-8000) for accurate temperature control of multiple zone Gradual Heating and Cooling is required. PRC 8000 is ideally suitable and is most economical as it eliminates the need for number of individual PID or ON/OFF Temperature Controllers required per zone. Each zone can be independently programmed for 16 steps of Ramp/Soak profile. Each loop parameters like PID, Hysteresis, Deviation Hold, Facility to skip unused channel etc… can be programmed from the user-friendly front panel membrane keyboard. The programmed profile and other parameters are retained in the non-volatile memory in the event of power failure.

PRC 8000 can accept 8 Thermocouples or RTD(Pt-100)3 wire inputs and can provide switching PID or ON/OFF Control output in the form of DC Pulses or SSR or relay to drive external load contactor drivers for heating and cooling. It can simultaneously provide 8 analog PID control outputs in the form of (4-20)mA or (0-5)volt, which can be used to control heater power through Thyristor power pack (for electrical heating system) or to control the position of a modulating motor valve (for oil or gas fired heating systems). The analog outputs can be directly connected to Libratherm make single phase / three phase SCR phase angle fired power controller which is ideally suitable for both resistive and inductive heating load

With the facility of copying Ramp/Soak profiles parameters of the single zone temperature controller to the all other available zones. Based on eight zone temperature controller is programed for Temperature Controller.

Features:

Application:



Additional Information:
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Multizone PID Ramp And Soak Programmable ?

    country-ico

    We will contact you soon !

    Kamlesh Panchal

    (Managing Director)

    Libratherm Instruments Private Limited

    Dahisar East, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us