Send SMS
Contact Us

Humidity and Temp Indicator Transmitter and Logger

Digital Hygro-Thermometer for Ambient Environment HTM-3000 wall mount

Digital Hygro-Thermometer for Ambient Environment HTM-3000 wall mount
  • Digital Hygro-Thermometer for Ambient Environment HTM-3000 wall mount
  • Digital Hygro-Thermometer for Ambient Environment HTM-3000 wall mount

Approx. Rs 7,500 / Number


Model Wise Description:

ModelProduct Description
HTM-3000-WT + RH Indicator with Alarms and Integrated sensor - Wall mounting


Description:

Libratherm offers micro-controller based (T + Rh) indicator, designed to monitor ambient T + Rh values in the office, stores, warehouse, shop floor or small factory areas. Apart from indication, this Hygro-Thermometer offers facility to set high and low limits and facility to view on demand the maximum and minimum variation in T + Rh values. In case of deviation of T or RH values from the set values, the internal beeper will sound. The beeper can be snoozed or Reset through keyboard. Bright Red and Green LED display clearly indicates temperature and humidity values even in the low ambient light. HTM-3000 operates on 24VDC power adapter.

Features:


Additional Information:

Clean Room Monitor and Real Time Data logger THP-300X

Clean Room Monitor and Real Time Data logger THP-300X
  • Clean Room Monitor and Real Time Data logger THP-300X
  • Clean Room Monitor and Real Time Data logger THP-300X
  • Clean Room Monitor and Real Time Data logger THP-300X

Approx. Rs 25,000 / Number


Model Wise Description:

ModelProduct Description
THP-3001-SSC(Only DP or T or RH) Indicator Transmitter - 1" display with built in real time data storage
THP-3002-SSC(T + RH) or (T + DP) or (RH + DP) Indicator Transmitter - 1" display with built in real time data storage
THP-3003-SSC(T + RH + DP) Indicator Transmitter - 1" display with built in real time data storage

Description:
Libratherm offers model THP-300X, micro-controller based (T + Rh + DP) Indicator cum Transmitter with 1” high digital display for long distance visibility and 4-20mA retransmission outputs for T, Rh and DP each. These instruments are specially designed for monitoring and real time data logging of clean room environmental conditions. Models are also available without data logging facility i.e. without real time clock and built in memory.

Digital interface such as RS-485 or Ethernet are integrated in the hardware to communicate with PC or PLC or HMI. All three types of indicators have built in memory and real time clock to store the T+RH+DP values at regular and programmable time interval. The stored data can be downloaded onto the computer via RS485 or LAN connection. Libratherm offers Window based PC software to monitor and store the data in continuous or batch format for on line or off line viewing and analysis in tabular or graphical format. The software allows user to prepare the batch report with desired fields such as product name, batch name, customer name etc. The THP series has built in flash memory to store real time 20000+ records.

Respective sensors for T, RH and DP are built-in to the same indicator or alternately provision for external sensor/transmitter is available.

The indicator is housed in an elegant SS enclosure with the depth of just 30mm and hence can be easily concealed inside the PUF panels of the clean rooms. The front facia has slanted borders to prevent dust accumulation. All input and output cable connections are accessible from top surface and DP connections are available through suitable nozzles on the bottom (As shown in the photographs).

Features:

Additional Information:

FLP Enclosure Temperature Humidity Indicator Transmitter

Approx. Rs 17,500 / Number


Model Wise Description:

ModelProduct Description
FTX-3000-TSingle Channel Temperature Indicator Transmitter - with 4-20mA retransmission output and RS-485 interface in FLP enclosure
FTX-3000-2TDual Channel Temperature Indicator Transmitter - with dual 4-20mA/0-10V retransmission output and RS-485 interface in FLP enclosure
FTX-3000-HSingle Channel Relative Humidity Indicator Transmitter - with 4-20mA retransmission output and RS-485 interface in FLP enclosure
FTX-3000-2HDual Channel Relative Humidity Indicator Transmitter - with dual 4-20mA retransmission output and RS-485 interface in FLP enclosure
FTX-3000-THTemperature + Relative Humidity Indicator Transmitter - with dual 4-20mA retransmission output and RS-485 interface in FLP enclosure


Description:
Libratherm offers micro-controller based only Temperature, only Relative Humidity and both T + RH Transmitter models as specified above in flame proof field mount enclosure, for measuring and indicating Temperature and Relative Humidity in the field or in the process. The measured values are converted to the equivalent analogue and digital values proportional to the Process Input for long distance transmission and to interface to the PLC or DCS or any other field device. FTX-3000 is a very useful device to capture the low level signal from the hazardous area and bringing back the signal to the main control room.

Temperature and Relative Humidity values corresponding to the input is indicated on the digital display and the corresponding display range is converted to the 2 wire current or voltage output of 4-20mA/0-10VDC proportional and linearized to the selected process input. This linearized signal can be used for remote measurement and indication. For the dual input models, two independent 4-20mA/0-10V signals are available. The analog outputs are isolated from the DC power supply.
To interface low level field signals with PLC or DCS or with any other process controller – the measured and displayed analog values are converted for digital serial communication on isolated RS485 bus with MODBUS RTU protocol in slave mode.

Advantage of RS485 interface: Providing the feature of RS 485 digital serial interface is advantageous, since the number of wires coming from the various sensors / transmitters can be avoided and instead, only two wires can be used to interface multiple such FTX-3000 on serial port. The digital communication has the greatest advantage of exactly replicating the process value, that is what is measured at the plant and what is displayed in the control room always matches one to one as compared to transmitting the analogue values. In today’s technology, most of the PLCs and DCS accepts RS485 digital interface.

Features:

Additional Information:

Temperature / Humidity Monitoring System With Alarms

Temperature / Humidity Monitoring System With Alarms
  • Temperature / Humidity Monitoring System With Alarms
  • Temperature / Humidity Monitoring System With Alarms
  • Temperature / Humidity Monitoring System With Alarms

Approx. Rs 28,500 / Number


Description:
Libratherm offers micro-controller based (T + Rh) monitoring system, model HTX-3001 with digital display, High and Low alarm relays, 4-20mA output, RS 485 and Ethernet outputs as per the requirement. Even SMS alert can be sent to 5 different users using GSM interface. User can store the desired 5 cell numbers in the SIM card where SMS are to be received. For Email alert, the desired 5 email IDs are to be specified by the user and will be factory programmed into the built-in memory of HTX-3001. For email alert facility, user must ensure to use the SIM card with data enabled facility from the service provider.

This model find its application in Green House, Storage rooms, Server room, data centers, Sterilizers, Pharmaceutical and Food product storage or manufacturing plants, Cold chain vehicles and all such similar areas where the measurement is important and critical and required to be strictly maintained at the desired levels. For sensing (T + Rh) in vacuum system, specially designed suitable sensor assemblies are also available.

Features:

Format of SMS/Email Alert:


Additional Information:

Clean Room Monitor & Real Time Data logger

Clean Room Monitor & Real Time Data logger

Approx. Rs 20,000 / Unit


Libratherm Instruments Private Limited - Offering Clean Room Monitor & Real-Time Data Logger.

Features:

Temperature and Humidity Transmitter With RS485 / Ethernet

Temperature and Humidity Transmitter With RS485 / Ethernet

Approx. Rs 20,000 / Number


Temperature / Humidity Transmitter With 4-20mA/RS-485 /Ethernet Interface (Model HTX-3000)

Model Wise Description:

ModelProduct Description
HTX-3000-WT + RH Transmitter - with Integrated sensor Wall mounting  
HTX-3000-FT + RH Transmitter - Floating leads (Sensor with cable)
HTX-3000-W-ST + RH Transmitter - with integrated sensor and RS 485 serial interface
HTX-3000-F-ST + RH Transmitter - Floating leads with RS 485 serial  interface  
HTX-3000-W-ET + RH Transmitter -   ETHERNET TCPIP interface
HTX-3000-F-ET + RH Transmitter - Floating leads with ETHERNET TCPIP interface

Description:

Libratherm offers micro-controller based (T + Rh) Transmitter model HTX-3000 with digital display, 4-20mA output, RS 485 or Ethernet interface as per the requirement.

This model find its application in Green House, Cold Storage rooms, Server rooms, Sterilizers, Pharmaceutical and Food product storage or manufacturing  plants and all such similar areas where the measurement is important and critical and required to be strictly monitored at the desired levels. For sensing (T + Rh) in vacuum system, specially designed suitable sensor assemblies are also available.

Features:

Additional Information:

Temperature / Humidity Transmitter with Built in Sensor

Temperature / Humidity Transmitter with Built in Sensor
  • Temperature / Humidity Transmitter with Built in Sensor
  • Temperature / Humidity Transmitter with Built in Sensor

Approx. Rs 13,500 / Number


Model Wise Description:

Model : HTX-3000-BIS   
Product Description : T + RH Indicator/Transmitter with Built in T +RH sensor – Wall mounting

Description:
Libratherm offers micro-controller based (T + Rh) sensor cum Transmitter model HTX-3000-BIS
This model finds its application in Green House, Storage rooms, Server rooms, Data centers, Sterilizers, Pharmaceutical Clean rooms, Textile and Food product storage or manufacturing plants and all such similar areas where measurement of T and Rh is important and critical and required to be strictly monitored.         4-20mA proportional to both T and Rh are available.

Features:

Additional Information:

Clean Room Monitor for Humidity &Temperature

Clean Room Monitor for Humidity &Temperature
  • Clean Room Monitor for Humidity &Temperature
  • Clean Room Monitor for Humidity &Temperature

Approx. Rs 25,000 / Unit


Libratherm offers micro-controller based (T + Rh + DP) Indicator cum Transmitters with 1” high digital display for long distance visibility and 4-20mA retransmission outputs for T, Rh and DP each. RS 485 or Ethernet interface is also made available for digital interface to PLC. These instruments are specially designed for cleanroom monitoring.
Respective sensors for T, RH and DP are built-in to the same enclosure or alternately provision for the external sensor is available.
The indicator is housed in an ABS – IP65 enclosure and top fascia is covered with stainless steel (SS304) metal plate. The indicator can be mounted in flush with the wall, all the sensing and cabling is done from the rear side of the enclosure. Externally connected sensors can be installed at suitable locations as per the requirement.

Features:

X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Humidity and Temp Indicator Transmitter and Logger ?

    country-ico

    We will contact you soon !

    Kamlesh Panchal

    (Managing Director)

    Libratherm Instruments Private Limited

    Dahisar East, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us